INSTALLATION

Installed height only 850 mm from the top of the rails (standard model).

Base of the barrier includes a cable channel.

Metal mesh on main surface to prevent vandalism (optional).

FLEXIBLE SOLUTION

Tracks do not always follow straight line. There are curves, bridges and changes in landscape. Sometimes there are safety exit requirements, switches and structures which may require special attention. We already have practical solutions to these special conditions and we can easily design solutions to specific needs. The requirements can be strict but our solution is flexible

COST EFFICIENCY

Soundim noise barriers require no separate foundation as barrier is fastened directly into track bed with fixing poles. These metal poles can be installed even with light weight drills. The poles are installed with the same interval as the barriers. When needed, the interval can be adjusted according to the ground conditions. As the barrier is installed at track bed, there is no need to acquire land from outside of the track zone nor investigate ground conditions for the noise barrier. This saves both time and money in a project.

EXTREME SUSTAINABILITY

There are three different materials used for the structure: Aluminum, steel and insulation made from recycled PET. Everything can be recycled without special measures. When needed, the whole structure can also be removed and used in another location. From environmental stand point the economic lifetime of the barrier can be over 50 years and there is no risk of contamination to the environment during the lifetime. Considering all the above, this is safe and sound solution!

INTEGRATED CABLE CHANNEL

A cable channel is integrated to the structure. The base of the barrier acts as the bottom of the cable channel and the actual barrier elements as the top of it. When needed, cable channel can be accessed by tilting the elements. Any cable entry or exit to the channel can be machined in to metal base profile. With this integrated cable channel, you can run cables even on structures like bridges.

EASY INSTALLATION

There are simple steps to install the Soundim noise barrier: Install the fixing poles, connect the pile heads and the base for the barrier to the poles and fix the barrier elements on top of that with bolts. It sounds easy – and it is. In fact, the installation can be performed even without operation stops at the track. Additionally, as a 4-meter element weight about 240 kg and 2-meter element only 150 kg, the clever design and light weight of the structure are major contributors to the ease of installation.